The Dynascale belt scale model 1014 is easy to install, indoors or outdoors, on stationary or mobile belts and is customised to your applications. Its robust construction makes it suitable for the most difficult applications on a wide variety of applications. The Dynascale 1014 belt scale has an OIML certificate according to the EEC directive, class 2, 1 and 0.5.

The weighing frame
The weighing frame consists of a very rigid inner frame without pivots and moving parts, on which 2, 3 or 4 weighing troughs are placed, depending on the application. The entire weighing frame, including the required tension rods and transport protection, is assembled in our workshop. Only 8 bolts are used to secure the weighing frame in the belt construction. By means of 4 precision load cells, the inner frame is suspended from both load cell beams.

The speed sensor

The digital speed sensor is a highly accurate and reliable speed sensor, ideally suited for use with a belt scale. Its stainless steel construction and IP67 protection degree ensure that it can be used in virtually all conditions, indoors and outdoors, corrosive or not,…

The transducer is mounted on the reversing drum and/or a travel roller on the output shaft, via a rod and a coupling piece to provide a smooth and reliable connection.

The Integrator
The WI301 integrator is a weight integrator for dynamic weighing systems. By integrating the mV signal from the load cells in the weighing frame and the pulse signal from the speed sensor, the WI301 integrator generates a readout for the product flow in e.g. tonnes/hour. It is also possible to read out the belt load (kg/m), belt speed (m/s) and the daily counter or total counter (kg or Ton). The integrator can also be equipped with various optional boards for e.g. communication purposes. The integrator can be used for both approved and non-approved applications.

Accuracy guarantee
On installations approved by us, we guarantee that the Dynascale belt weighing system weighs and counts within a value of +- 0.125 % of the test value, between 20 and 100 % of the maximum capacity, provided it is calibrated with material and the conveyor installation is suitable for it.